Base DIY 30PG / 70VG - e-Saveur-2
      • Base DIY 30PG / 70VG - e-Saveur-2

      Base DIY 30PG / 70VG - e-Saveur

      (0) Reviews
      €8.90
      Tax included

      Discover our DIY base of the e-Saveur brand in 30% vegetable propylene glycol and 70% vegetable glycerin, in a 500ml / 1L bottle with tamper-evident ring, child-resistant, allowing you to make the recipes you want.

      Volume
      Quantity
      En Stock

      Last time this product was added to a cart: 05/02/2020

        100% secure payment

      100% secure payment by card and Paypal.

        Delivery policy

      Free delivery for all orders placed before 3 p.m. bound for Metropolitan France.

        Return policy

      Fast aftersale service and free product return.

      SOME ADVICE FOR OPTIMAL USE OF THE PRODUCT

      1. CHOOSE A BASE

      A base is a non-flavored liquid consisting of propylene glycol (PG), vegetable glycerin (VG) and possibly nicotine (for nicotine bases).

      • Propylene glycol (PG) promotes the "hit" (contraction of the throat sought by smokers) in addition to nicotine. It produces a small amount of vapor. Its use can be problematic on some atomizers and cause leaks due to its low viscosity.
      • Vegetable glycerin (VG) produces a lot of vapor and tends to dissipate slowly in the air. It can however slightly alter the aromas by softening them (sweet taste) as well as the "hit". Vegetable glycerin is relatively viscous and fouls the resistance of atomizers more quickly.

      Therefore,

      • The bases in 50PG / 50VG represent for many vapers the ideal relationship between the hit and the vapor.
      • The bases in 30PG / 70VG or 20PG / 80VG and 100% are more used by confirmed vapers using reconstructable material, they bring a denser vapor, smoother flavors but a less important hit.

      Be careful to choose your base according to your material, some clearomizers (entry level) do not support e-liquids with a VG rate too high because of their viscosity.



      2. DILUTE THE CONCENTRATE IN A BASE

      WASH HANDS, WORK OUT OF REACH OF CHILDREN ON A CLEAN WORKTOP.

      • Using a syringe or pipette, fill an empty vial with your ready-to-use base. Choose your bottles according to the volume you want to obtain after preparation.
      • The base containing nicotine must be handled with great care. We advise you to use latex gloves and protective glasses for maximum safety that you can find in the DIY / ACCESSORIES category.
      • Shake your aroma bottles before use.
      • Add a few drops of flavor (s) (See dosing recommendations on the product sheet). You make find your favorite concentrated aromas in CONCENTRATED AROMA Remember that your final e-liquid must contain: 85% base + 13% concentrated aroma + 2% additive (For example, to make 10ml of e-liquid: put 8.5ml base, the remaining +/- 1.5 ml will be the flavorings and additives).
      • Optional: add one or more additives.
      • Shake vigorously for 10 to 20 seconds and let stand for the maturation of the aromas.
      • Wash your hands again, clean your equipment and your worktop.
      • Write down your recipe to redo it later or pass it on.



      3. PRECAUTIONS FOR USE

      • Toxic in contact with skin (for e-liquids with nicotine). Keep out of reach of children and locked up.
      • In case of skin contact: wash with plenty of soap and water.
      • If swallowed or if you feel unwell, contact a poison control center or doctor and show the label of the e-liquid bottle.
      • Do not use in pregnant or lactating women. Not recommended for people with cardiovascular, epileptic or sensitive to nicotine or any of the other ingredients.
      • Prohibited under 18.
      • Product intended only for the refill of electronic cigarette.



      4. CONSERVATION

      For optimal efficiency of your e-liquids, make sure to store them in a dry place away from light. Finally, the flavor does not deteriorate, remember to refill your bottle after use.



      5. PROTECTION OF THE ENVIRONMENT:

      Consider giving your e-liquid bottles a second life by reusing them, for example for your DIY preparations.

      If your vial contained nicotine, do not pour its content into your pipes. The latter would in fact risk contaminating the groundwater. Do not put your vial in your usual plastic sorting bin either.

      Be sure to deposit your bottle of nicotine e-liquid in a collection point for solvents and phytosanitary products. If in doubt, we invite you to contact your usual recycling center.

      ES04193-1521
      55 Items

      Data sheet

      Manufacturer
      e-Saveur
      Manufacturing country
      France
      Type of products
      Base
      Ratio PG:VG
      30:70
      Capacity
      500ml / 1L
      Packaging
      PE bottle with childproof lock
      Nicotine
      0mg

      Specific References

      EAN13
      3760013893743

      No customer reviews for the moment.

      Write your review

      Base DIY 30PG / 70VG - e-Saveur

      Discover our DIY base of the e-Saveur brand in 30% vegetable propylene glycol and 70% vegetable glycerin, in a 500ml / 1L bottle with tamper-evident ring, child-resistant, allowing you to make the recipes you want.

      Write your review
      7 other products in the same category:
      chat Comments (0)
      No customer reviews for the moment.